Exact configuration
SKU, size, PCD, ET, center bore, finish and any vehicle-specific requirements are recorded as one approved configuration.
DQ012 Alloy Wheels
Specification overview only: the size, PCD, ET and center-bore values below are not automatically combinable. Confirm the exact combination with AORUI before ordering or vehicle fitment.
Model
DQ012
Sizes
18x8.0
Bolt Pattern (PCD)
5x112 / 5x120
Offset (ET)
ET30
Center Bore
66.56 / 72.56 mm
Finish
Gloss Black / Sandblasted Bronze
Material
Aluminum Alloy
Verified Catalog Specifications
Each row is one complete catalog configuration. Size, PCD, ET, center bore and bolt seat are not combined across rows.
| Size | PCD | ET | CB | Bolt seat | |
|---|---|---|---|---|---|
| 18x8.0 | 5x112 | ET30 | 72.56 mm | Confirm before ordering | Request this spec |
| 18x8.0 | 5x120 | ET30 | 66.56 mm | Confirm before ordering | Request this spec |
| 18x8.0 | 5x112 | ET30 | 66.56 mm | Confirm before ordering | Request this spec |
Manufacturing process, load rating, brake clearance and vehicle fitment require separate confirmation.
DQ012 — Concave Mesh Design
DQ012 is an 18-inch concave mesh wheel offered in gloss black and sandblasted bronze. Each specification row above is an independent catalog configuration; PCD and center-bore values must not be mixed between rows.
Vehicle application screening
- 5x112 variants: technical-family screening candidates for European passenger vehicles using 5x112. A 72.56 mm center bore requires a verified hub-centering solution when the vehicle hub is smaller; the 66.56 mm version still needs an actual hub and tolerance check.
- 5x120 variant: a parameter-screening candidate for 5x120 platforms only. Its 66.56 mm center bore must be checked against the actual vehicle hub before approval.
Confirm chassis-specific width and offset limits, brake clearance, mounting hardware and load requirement. These directions are not confirmed vehicle fitment.
Quick product answer
What is the published AORUI DQ012 wheel specification?
AORUI DQ012 is a B2B wheel-sourcing program in aluminum alloy, listed under catalog alloy wheels. The currently published product data lists 18x8.0, PCD 5x112 / 5x120, ET30, center bore 66.56 / 72.56 mm and Gloss Black / Sandblasted Bronze finish.
Facts available on this page
- Model
- DQ012
- Product type
- Catalog Alloy Wheels
- Material
- Aluminum Alloy
- Published sizes
- 18x8.0
- Published PCD
- 5x112 / 5x120
- Published offset
- ET30
- Published center bore
- 66.56 / 72.56 mm
- Published finish
- Gloss Black / Sandblasted Bronze
Procurement clarity
What your written quote will confirm for DQ012
Commercial and safety-critical details depend on the exact wheel configuration. We keep unverified values off the product page and confirm the applicable terms in writing before an order.
MOQ & pricing basis
MOQ and unit pricing are confirmed against the selected process, specification, finish, quantity and commercial terms.
Sample & production schedule
Sample availability and production lead time are confirmed after specification, finish and current capacity are reviewed.
Engineering evidence
Weight, load rating, brake clearance and certification coverage are stated only when product-specific evidence is available.
Branding & packaging
Center caps, logos, cartons, labels and pallet requirements are documented for private-label projects.
Warranty & claims
The applicable warranty scope, inspection basis and claims process are included in the order documents before commitment.
Send these details for a faster, more accurate quote
You do not need a finished technical drawing. Share as much as you know and we will identify the remaining decisions.
- Target wheel model, size, width, PCD, ET and center bore
- Vehicle list or intended market and application
- Quantity per model or estimated monthly/annual volume
- Finish, logo, center-cap and packaging requirements
- Required testing or market documentation
- Destination country or port and required delivery window
Product sourcing questions
Why is MOQ not shown as one fixed number?
MOQ changes with the manufacturing process, exact specification, finish, branding and quantity mix. It is confirmed against the selected configuration instead of publishing a number that may not apply.
Can I order based on PCD alone?
No. PCD alone does not prove fitment. Size, width, offset, center bore, brake clearance, load requirement, mounting hardware and the exact vehicle configuration must also be checked.
What will I receive after sending an RFQ?
The first response identifies feasibility and any missing information. A written quotation then records the confirmed specification, commercial basis, schedule and applicable documentation.
Spec a DQ012 Program
Tell us your target sizes, finishes and volumes. We'll confirm specifications, documentation and project requirements within 24 hours.