Exact configuration
SKU, size, PCD, ET, center bore, finish and any vehicle-specific requirements are recorded as one approved configuration.
LK023 Alloy Wheels
Specification overview only: the size, PCD, ET and center-bore values below are not automatically combinable. Confirm the exact combination with AORUI before ordering or vehicle fitment.
Model
LK023
Sizes
18x8.0
Bolt Pattern (PCD)
5x112 / 5x120
Offset (ET)
ET35
Center Bore
72.56 / 72.6 mm
Finish
Black / Gloss Black Machined / Gunmetal Machined
Material
Aluminum Alloy
Verified Catalog Specifications
Each row is one complete catalog configuration. Size, PCD, ET, center bore and bolt seat are not combined across rows.
| Size | PCD | ET | CB | Bolt seat | |
|---|---|---|---|---|---|
| 18x8.0 | 5x120 | ET35 | 72.56 mm | Confirm before ordering | Request this spec |
| 18x8.0 | 5x112 | ET35 | 72.56 mm | Confirm before ordering | Request this spec |
| 18x8.0 | 5x120 | ET35 | 72.6 mm | Confirm before ordering | Request this spec |
Manufacturing process, load rating, brake clearance and vehicle fitment require separate confirmation.
LK023 — Split Multi-Spoke Design
LK023 is an 18-inch split multi-spoke wheel with black, gloss black machined and gunmetal machined catalog options. Treat every row above as a complete specification combination.
Vehicle application screening
The 5x120 and approximately 72.6 mm center-bore versions may be screened for legacy BMW 5x120 passenger platforms. The 5x112/72.56 mm row may be screened for 5x112 vehicles only when a verified hub-centering solution is included. Exact chassis, offset, brake clearance, mounting hardware and load requirement must be reviewed before approval.
These are screening directions, not direct-fit claims.
Quick product answer
What is the published AORUI LK023 wheel specification?
AORUI LK023 is a B2B wheel-sourcing program in aluminum alloy, listed under catalog alloy wheels. The currently published product data lists 18x8.0, PCD 5x112 / 5x120, ET35, center bore 72.56 / 72.6 mm and Black / Gloss Black Machined / Gunmetal Machined finish.
Facts available on this page
- Model
- LK023
- Product type
- Catalog Alloy Wheels
- Material
- Aluminum Alloy
- Published sizes
- 18x8.0
- Published PCD
- 5x112 / 5x120
- Published offset
- ET35
- Published center bore
- 72.56 / 72.6 mm
- Published finish
- Black / Gloss Black Machined / Gunmetal Machined
Procurement clarity
What your written quote will confirm for LK023
Commercial and safety-critical details depend on the exact wheel configuration. We keep unverified values off the product page and confirm the applicable terms in writing before an order.
MOQ & pricing basis
MOQ and unit pricing are confirmed against the selected process, specification, finish, quantity and commercial terms.
Sample & production schedule
Sample availability and production lead time are confirmed after specification, finish and current capacity are reviewed.
Engineering evidence
Weight, load rating, brake clearance and certification coverage are stated only when product-specific evidence is available.
Branding & packaging
Center caps, logos, cartons, labels and pallet requirements are documented for private-label projects.
Warranty & claims
The applicable warranty scope, inspection basis and claims process are included in the order documents before commitment.
Send these details for a faster, more accurate quote
You do not need a finished technical drawing. Share as much as you know and we will identify the remaining decisions.
- Target wheel model, size, width, PCD, ET and center bore
- Vehicle list or intended market and application
- Quantity per model or estimated monthly/annual volume
- Finish, logo, center-cap and packaging requirements
- Required testing or market documentation
- Destination country or port and required delivery window
Product sourcing questions
Why is MOQ not shown as one fixed number?
MOQ changes with the manufacturing process, exact specification, finish, branding and quantity mix. It is confirmed against the selected configuration instead of publishing a number that may not apply.
Can I order based on PCD alone?
No. PCD alone does not prove fitment. Size, width, offset, center bore, brake clearance, load requirement, mounting hardware and the exact vehicle configuration must also be checked.
What will I receive after sending an RFQ?
The first response identifies feasibility and any missing information. A written quotation then records the confirmed specification, commercial basis, schedule and applicable documentation.
Spec a LK023 Program
Tell us your target sizes, finishes and volumes. We'll confirm specifications, documentation and project requirements within 24 hours.