Exact configuration
SKU, size, PCD, ET, center bore, finish and any vehicle-specific requirements are recorded as one approved configuration.
ZKX328 Alloy Wheels
Specification overview only: the size, PCD, ET and center-bore values below are not automatically combinable. Confirm the exact combination with AORUI before ordering or vehicle fitment.
Model
ZKX328
Sizes
18x8.0
Bolt Pattern (PCD)
5x108 / 5x112
Offset (ET)
ET35 / ET38
Center Bore
66.45 / 73.1 mm
Finish
Gunmetal Machined / Black Machined / Gloss Black Machined
Process
Flow Formed
Material
Aluminum Alloy
Verified Catalog Specifications
Each row is one complete catalog configuration. Size, PCD, ET, center bore and bolt seat are not combined across rows.
| Size | PCD | ET | CB | Bolt seat | |
|---|---|---|---|---|---|
| 18x8.0 | 5x112 | ET38 | 66.45 mm | Confirm before ordering | Request this spec |
| 18x8.0 | 5x112 | ET38 | 66.45 mm | Ball seat; confirm before ordering | Request this spec |
| 18x8.0 | 5x108 | ET35 | 73.1 mm | Confirm before ordering | Request this spec |
Manufacturing process, load rating, brake clearance and vehicle fitment require separate confirmation.
ZKX328 — Flow Formed Five-Spoke Design
ZKX328 is an 18x8.0 five-spoke program. The 5x112 and 5x108 rows use different center bores and offsets and must not be combined.
Vehicle application screening
- The 5x112/66.45 mm ET38 rows may be screened for European 5x112 passenger platforms using an approximately 66.5 mm hub. One row explicitly specifies a ball seat.
- The 5x108/73.1 mm ET35 row may be screened for selected Ford, Volvo, Jaguar or Land Rover passenger platforms only after the actual hub diameter and an approved centering solution are confirmed.
Exact chassis, brake clearance, seat type, hardware and load requirements remain mandatory checks.
Quick product answer
What is the published AORUI ZKX328 wheel specification?
AORUI ZKX328 is a B2B wheel-sourcing program in aluminum alloy, listed under flow formed wheels. The currently published product data lists 18x8.0, PCD 5x108 / 5x112, ET35 / ET38, center bore 66.45 / 73.1 mm and Gunmetal Machined / Black Machined / Gloss Black Machined finish, using the flow formed process.
Facts available on this page
- Model
- ZKX328
- Product type
- Flow Formed Wheels
- Material
- Aluminum Alloy
- Published sizes
- 18x8.0
- Published PCD
- 5x108 / 5x112
- Published offset
- ET35 / ET38
- Published center bore
- 66.45 / 73.1 mm
- Published finish
- Gunmetal Machined / Black Machined / Gloss Black Machined
- Published process
- Flow Formed
Procurement clarity
What your written quote will confirm for ZKX328
Commercial and safety-critical details depend on the exact wheel configuration. We keep unverified values off the product page and confirm the applicable terms in writing before an order.
MOQ & pricing basis
MOQ and unit pricing are confirmed against the selected process, specification, finish, quantity and commercial terms.
Sample & production schedule
Sample availability and production lead time are confirmed after specification, finish and current capacity are reviewed.
Engineering evidence
Weight, load rating, brake clearance and certification coverage are stated only when product-specific evidence is available.
Branding & packaging
Center caps, logos, cartons, labels and pallet requirements are documented for private-label projects.
Warranty & claims
The applicable warranty scope, inspection basis and claims process are included in the order documents before commitment.
Send these details for a faster, more accurate quote
You do not need a finished technical drawing. Share as much as you know and we will identify the remaining decisions.
- Target wheel model, size, width, PCD, ET and center bore
- Vehicle list or intended market and application
- Quantity per model or estimated monthly/annual volume
- Finish, logo, center-cap and packaging requirements
- Required testing or market documentation
- Destination country or port and required delivery window
Product sourcing questions
Why is MOQ not shown as one fixed number?
MOQ changes with the manufacturing process, exact specification, finish, branding and quantity mix. It is confirmed against the selected configuration instead of publishing a number that may not apply.
Can I order based on PCD alone?
No. PCD alone does not prove fitment. Size, width, offset, center bore, brake clearance, load requirement, mounting hardware and the exact vehicle configuration must also be checked.
What will I receive after sending an RFQ?
The first response identifies feasibility and any missing information. A written quotation then records the confirmed specification, commercial basis, schedule and applicable documentation.
Spec a ZKX328 Program
Tell us your target sizes, finishes and volumes. We'll confirm specifications, documentation and project requirements within 24 hours.